Schuebeler DS-86-AXI-HDS 10 Blade FAN, FANFIX and HET 800-68-685 12S


Schuebeler DS-86-AXI-HDS 10 Blade FAN, FANFIX and HET 800-68-685 12S

In stock
can be shipped within 2-5 days

544.00
Price incl. VAT, plus shipping
 


DS-86-AXI HDS® V2016 -  Setup with FANFIX and  Motor HET 800-68-685

By choosing a motor it will be mounted, wired and fine balanced

DS-86-AXI HDS® with Motor HET 800-68-685:

  • Cells: 12S
  • Current: 82A
  • Thrust: 6.2kg
  • RPM: 29,500
  • Weight: 800g

 

 

DS-86-AXI HDS® V2016 - individual setup at highest efficiency

DS-AXI-86 HDS® V2016

Efficiency. Precision. Durability.

The 86HDS® also relies on the classical HDS® features but even adds that extra bit:

>Lighter and remarkably shorter rotor assembly
>Blades made from a high-temperature resistant fibre-reinforced >polymere
>Carbon Fibre shroud
>High-precision collet chuck
>Possibility for Fine-Balancing
>Material Mix of CFRP, aluminum and injection moulding

Individual Setup

The latest version of our HDS® fans completes the series with a 120mm fan which also works ideally with Tenshock, HET and TP motors. The HDS® series is characterised by the fact that motors are freely selectable according to the customers preferences while keeping up highest efficiency levels as a result of our integral development approach. This has the advantage that you can also order a stand-alone fan in order to combine it with your existing motor. Due to our experience as well as the possibility for fine-balancing a smoothly running system is achieved. Of course, we can take care of the installation; but versed customers will also be able to conduct installation on their own.

Proven Efficiency

The fans have been combined with the above-mentioned motors forming setups that have been tested extensively until product launch. As usual at Schübeler Composite, simulations and testings were effected preceding the construction phase which corresponds to our policy of providing highest quality and efficiency levels. In here efficiency means especially to transfer low electrical power into high thrust and jet velocity. The implementation of  Tenshock, HET and TP motors is only possible due to the optimum balance of rotational speed and torque.

Established Cooling

Our  calculations and development work results  in a product reaching perfect utilisation of the above-mentioned motors. That is why we are able to reach extremely cool running propulsion setups: the motors are not forced into a low rotational speed which is why they do not overheat. Residual heat is lead away by means of the established HDS® typical cooling.

Technical Data DS-86-AXI HDS® (120mm)

Max. RPM: 35,500
Max. Power: 7,500W
Max. Thrust: 101N
Max. Exhaust Speed: 99m/s
weight: 290g
Max. Motor Diameter 56mm
Shaft Diameter: 8mm g6

Motor Cells Current Thrust RPM
HET 800-55-675 14S 90A 74 N 31.000
HET 800-60-830 10S 89A 59 N 28.500
HET 800-68-685 12S 82A 62 N 29.500
HET 800-73-590 14S 76A 65 N 30.000
Tenshock X-501 5,5Y 12-14S 115-140A 76-98 N 31.000-35.500
Tenshock X-501 6Y 14S 118A 87 N 34.000
Tenshock X-501S 8Y 12S 113A 74 N 31.000
TP 5660 9D 10S 141A 79 kg 33.000

Conversion to lbs: 1 N = 0,2248 lbs

Accessories

Product Note Status Price
Young Genaration Electronics YGE 165 HVT Controller Young Genaration Electronics YGE 165 HVT Controller
369.00 *
031YGEProgcard3 031YGEProgcard3
19.90 *
Young Genaration Electronics YGE 200 HV Controller Young Genaration Electronics YGE 200 HV Controller
419.00 *
Polyester material white / gray to use for thrust tube manufacturing ca.620x320x0,2 mm Polyester material white / gray to use for thrust tube manufacturing ca.620x320x0,2 mm
14.00 *
FJ1013 FJ1013
18.00 *
Polyester material silver&white high gloss to build an thrust tube for EDF models Polyester material silver&white high gloss to build an thrust tube for EDF models
18.00 *
*
Prices incl. VAT, plus shipping
 
Display accessory details

Browse these categories as well: Fantastic-Jets, 120 mm Impeller, Promotional Items