DS-86-AXI HDS® V2016 - Setup with FANFIX and Motor HET 800-68-685
By choosing a motor it will be mounted, wired and fine balanced
DS-86-AXI HDS® with Motor HET 800-68-685:
- Cells: 12S
- Current: 82A
- Thrust: 6.2kg
- RPM: 29,500
- Weight: 800g
DS-86-AXI HDS® V2016 - individual setup at highest efficiency
DS-AXI-86 HDS® V2016
Efficiency. Precision. Durability.
The 86HDS® also relies on the classical HDS® features but even adds that extra bit:
>Lighter and remarkably shorter rotor assembly
>Blades made from a high-temperature resistant fibre-reinforced >polymere
>Carbon Fibre shroud
>High-precision collet chuck
>Possibility for Fine-Balancing
>Material Mix of CFRP, aluminum and injection moulding
The latest version of our HDS® fans completes the series with a 120mm fan which also works ideally with Tenshock, HET and TP motors. The HDS® series is characterised by the fact that motors are freely selectable according to the customers preferences while keeping up highest efficiency levels as a result of our integral development approach. This has the advantage that you can also order a stand-alone fan in order to combine it with your existing motor. Due to our experience as well as the possibility for fine-balancing a smoothly running system is achieved. Of course, we can take care of the installation; but versed customers will also be able to conduct installation on their own.
The fans have been combined with the above-mentioned motors forming setups that have been tested extensively until product launch. As usual at Schübeler Composite, simulations and testings were effected preceding the construction phase which corresponds to our policy of providing highest quality and efficiency levels. In here efficiency means especially to transfer low electrical power into high thrust and jet velocity. The implementation of Tenshock, HET and TP motors is only possible due to the optimum balance of rotational speed and torque.
Our calculations and development work results in a product reaching perfect utilisation of the above-mentioned motors. That is why we are able to reach extremely cool running propulsion setups: the motors are not forced into a low rotational speed which is why they do not overheat. Residual heat is lead away by means of the established HDS® typical cooling.
Technical Data DS-86-AXI HDS® (120mm)
Max. RPM: 35,500
Max. Power: 7,500W
Max. Thrust: 101N
Max. Exhaust Speed: 99m/s
Max. Motor Diameter 56mm
Shaft Diameter: 8mm g6
|Tenshock X-501 5,5Y
|Tenshock X-501 6Y
|Tenshock X-501S 8Y
|TP 5660 9D
Conversion to lbs: 1 N = 0,2248 lbs